Product ID:EPIBOND 952 HARDNER
MSDS Date:01/01/1987
FSC:8040
NIIN:00-117-8508
MSDS Number: BCZQK

Emergency Phone: 213-247-6210

Info Phone: 213-247-6210

Preparer: W. J. DEWAR

Cage: 76323

Telephone: 818-247-6210/800-873-1138

Cage: 76323

POLYALKYLAMINE

Fraction By Weight: 100%

Effects of Overexposure:SKIN/EYES:BURNS;REPEAT/PROLONGED CONTACT MAY
CAUSE DERMATITIS(STRONG SENSITIZER)

First Aid:INHALE:REMOVE TO FRESH AIR,GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE
MOUTH;GET MEDICAL ATTENTION FOR EYES,INGEST BREATHING
DIFFICULTIES,OR OTHER SYMPTOMS OF OVEREXPOS URE.

Flash Point:>275F,>135C(COC)
Extinguishing Media:WATER,CO*2,OR DRY CHEMICAL POWDER(H*2O,ABSORBS
NOXIOUS FUME.
Fire Fighting Procedures:H*2O SPRAY TO COOL CONT,KNOCK-DOWN
VAPORS.NIOSH/MSHA SCBA
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE,AVOID PHYSICAL CONTACT,
REMOVE & WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE
SKIN CREAMS. EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:IF EXPOSD TLV,NIOSH/MESA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
VAPOR PRESSURE IS LESS THAN 0.01.

HCC:N1
Boiling Pt:B.P. Text:>400F,>204C
Vapor Pres:<0.01
Vapor Density:5
Spec Gravity:0.98
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR THIN LIQUID;STRONG AMINE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
ACIDS AND PEROXIDES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:EXPECT AMINE FRAGMENTS.
Conditions to Avoid Polymerization:AVOID CONTAMINATION WITH ACIDS OR
PEROXIDES.

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSAL.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. MFG SUGGESTS
INCINERATION OR FLUSH IN APPROVED SEWER,USING EXCESSIVE AMOUTNS OF
WATER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.